News Security news

SonicWall: Gen 6 firewalls will get no more patches – take them out of service now

On 18 November 2026 SonicWall published an advisory urging customers still running Gen 6 and Gen 6.5 firewalls to replace them immediately and, above all, to stop using them at the internet edge. Every model running SonicOS 6.x, including NSv virtual firewalls, is now past end of support: no firmware and no security fixes will ship for them – not even for a critical vulnerability.

Kyberkit editorial team · · event date · reading time 4 minutes · For admins and analysts

News: SonicWall Gen 6 end of support

Key points

  • What: on 18 Nov 2026 SonicWall told customers to replace Gen 6 and Gen 6.5 firewalls (SonicOS 6.x, including NSv virtual appliances) immediately and to stop using them at the internet edge.
  • Why: all of these models are past end of support – the last batch (TZ350/500, SOHO 250, NSA 4600–6600, NSa 4650–6650) since 1 Oct 2026. No more firmware or fixes will ship, and SonicWall says there will be no exception for critical flaws.
  • November's SonicOS 7.3.4 and 8.2.3 fixes (SNWLID-2026-0014) were released for Gen 7 and Gen 8 only; Gen 6 units won't get them.
  • Until replacement: disable WAN management (HTTPS, SSH, SNMP), disable SSL VPN or limit it to known source addresses, enforce MFA for remote access and admins, reset local passwords and watch the logs.

What happened

On 18 November 2026 SonicWall published a product advisory titled "Retire Unsupported Gen 6 Firewalls". It tells customers still running Gen 6 and Gen 6.5 firewalls on SonicOS 6.x – including NSv virtual firewalls – to replace them immediately and to stop using them at the internet edge.

The reason is simple: every one of these models is now past end of support. SonicWall will not release any further firmware or security fixes for them, regardless of severity, and says it won't make an exception for critical vulnerabilities either. Gen 6 support can no longer be bought or renewed. The advisory sums it up by saying that an end-of-life firewall that is still running is not a firewall that can still be secured.

Which models are affected

End-of-support dates as listed in SonicWall's advisory:

Models Generation End of support
TZ350, TZ350W, TZ500, TZ500W, SOHO 250, SOHO 250W Gen 6 / 6.5 1 Oct 2026
NSA 4600, NSA 5600, NSA 6600 Gen 6 1 Oct 2026
NSa 4650, NSa 5650, NSa 6650 Gen 6.5 1 Oct 2026
TZ400, TZ400W, TZ600, TZ600P, NSA 3600 Gen 6 1 Aug 2026
NSa 3650 Gen 6.5 1 Aug 2026
NSa 2650 Gen 6.5 1 May 2026
SOHO, SOHO W, TZ300P, NSa 9250, NSa 9450, NSa 9650 Gen 6 / 6.5 16 Apr 2026
NSv 10 to NSv 1600 (virtual) Gen 6 16 Apr 2026
SuperMassive 9200, 9400, 9600, 9800 Gen 6 20 Feb 2026
NSsp 12400, NSsp 12800 Gen 6.5 20 Feb 2026
TZ300, TZ300W Gen 6 23 Jan 2025
NSA 2600 Gen 6 8 Mar 2024

So the end of support itself isn't new – for the last group of models it came on 1 October. What's new is the vendor's explicit call to pull these devices out of service.

Why it's urgent

The firewall and SSL VPN gateway are the first things an attacker on the internet runs into, and SonicWall kit has been targeted before. CVE-2024-40766, an improper access control flaw in SonicOS management access, affected Gen 5, Gen 6 and early Gen 7 devices. CISA added it to its Known Exploited Vulnerabilities (KEV) catalog on 9 September 2024, and SonicWall's advisory links it to ransomware activity against SSL VPN accounts. Gen 6 was still supported back then and received a fix. The next flaw like it won't get one.

November shows this isn't hypothetical. SonicWall shipped SonicOS 7.3.4 and 8.2.3 with fixes for several high- and medium-severity flaws (SNWLID-2026-0014), including the exploited SAML login bypass in SSL VPN we covered in SonicWall SSLVPN CVE-2026-19868: attackers bypass SAML login and MFA. Those releases are available for Gen 7 and Gen 8 only; SonicWall says Gen 6 is out of support and won't receive them.

What to do

  1. Take inventory. Find every Gen 6 and 6.5 firewall – including spares, branch-office units and NSv virtual appliances. Look for SonicOS 6.x in the web management console.
  2. Prioritise by exposure. Start with devices reachable from the internet and those providing remote access (SSL VPN or WAN management).
  3. Replace them. SonicWall recommends a Gen 8 firewall running SonicOS 8. Supported settings from SonicOS 6.5 can be carried over using the built-in import or the NSM Migration App, so you don't have to rebuild everything. Check the migrated rules and VPN configuration afterwards.

Until the replacement is in place, SonicWall advises cutting down what the device exposes to the internet. It's explicit that these steps reduce risk but don't make the firewall secure:

  • disable WAN management (HTTPS, SSH and SNMP on WAN interfaces),
  • disable SSL VPN, or allow it only from known source addresses,
  • enforce multi-factor authentication (MFA) on all remote-access and admin accounts, and reset local passwords,
  • turn off unused services and interfaces,
  • monitor logs for unusual logins, configuration changes and traffic.

If the logs show a login you don't recognise, treat it as a possible compromise: reset passwords for every VPN account, review the configuration and report the incident – in the UK to the NCSC, in the US to CISA.

FAQ

Does an end-of-support Gen 6 firewall become dangerous straight away?

It won't stop working, but every newly discovered SonicOS 6 flaw will now stay unpatched. Firewalls and VPN gateways sit directly on the internet, and attackers have repeatedly gone after SonicWall devices in the past. That's why SonicWall wants Gen 6 off the network edge as soon as possible.

How do I know if I have Gen 6?

By model and OS version. Gen 6 and 6.5 run SonicOS 6.x (for example 6.5.4). That covers the TZ300 to TZ600 range, SOHO and SOHO 250, NSA 2600 to 6600, NSa 2650 to 9650, SuperMassive 9200 to 9800, NSsp 12400 and 12800, and the NSv 10 to NSv 1600 virtual firewalls. The device's web management console shows the model and firmware version on its dashboard or system overview.

Do we have to rebuild the configuration from scratch?

Not entirely, according to SonicWall. Supported settings from SonicOS 6.5 can be moved to a Gen 8 firewall on SonicOS 8 using the built-in import or the NSM Migration App. Review the migrated rules and VPN settings anyway, particularly if you're still on a release older than 6.5.

Sources

  1. SonicWall – Product Advisory: Retire Unsupported Gen 6 Firewalls (18 Nov 2026)
  2. SonicWall – SonicOS 7.3.4 and 8.2.3 Security Advisory – Gen 7 and Gen 8 Firewalls (updated 6 Nov 2026)
  3. NVD – CVE-2024-40766

Spotted a mistake? Let us know and we will correct it openly.